Compaq Series 400, Maintenance And Service Manual

Page: 63 / 300

Replacing the Memory Expansion Board
To replace the memory expansion board, follow these steps:
1. Align the two connectors on the memory expansion board with the
corresponding connectors on the system board.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To prevent damage to the memory expansion board, do not apply pressure to
the middle of the board. Press only in the area directly over each
connector.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
2. Insert the memory expansion board into the compartment and press the
memory expansion board down. Apply pressure directly over each
connector.
Ensure that both connectors snap into place (Figure 3-16).