3-59
Compaq ProLiant 800 Servers Maintenance and Service Guide
■
Network controller
Compaq
■
Network host name
CPQHOU
■
Network card slot
Slot #
■
Network frame type
ETHERNET_II
■
Network IP address
xxx.xxx.xxx.xxx
■
Network IP net mask
xxx.xxx.xxx.xxx
■
Network IP router address
xxx.xxx.xxx.xxx
ASR-2 Security
The standard Compaq password features function differently during ASR-2 than during a typical
system startup.
During ASR-2, the system does not prompt for the Power-On Password. This allows the ASR-2
to restart the operating system or Compaq Utilities without user intervention.
To maintain system security, set the server to boot in Network Server Mode (an option in the
System Configuration Utility). This option ensures that the server keyboard is locked until you
enter the Keyboard Password.
Select an Administrator Password (an option in the System Configuration Utility). During
attended ASR-2 (local or remote), you must enter this Administrator Password before any
modifications can be made to the server configuration.
Server Health Logs
In some servers, Server Health Logs are replaced by the IML, if it is supported. See “Integrated
Management Display” in this chapter for more information.
Server Health Logs contain information to help identify and correct any server failures and
correlate hardware changes with server failure. Server Health Logs are stored in nonvolatile
RAM and consist of the Critical Error Log and the Revision History Table.
If errors occur, information about the errors is automatically stored in the Critical Error Log.
Whenever boards or components (that support revision tracking) are updated to a new revision,
the Revision History Table is updated.
