Compaq Presario V3000 - Notebook PC Service Manual Download

Page: 244 / 278

B–10

Maintenance and Service Guide

Backup and Recovery

Recovering from the Partition on the
Hard Drive

You can perform a recovery from the partition on the hard drive
from either the Start button or

f11

To restore the system from the partition:

1. Access the PC Recovery tool:

❏

To access PC Recovery from the Start button, select

Start > All Programs > System Recovery >
PC Recovery

❏

To access PC Recovery from

f11

, restart the computer and

press

f11

while the “Press <F11> for recovery” message is

displayed on the screen.

The PC Recovery tool opens.

2. Select

PC Recovery

and click

Next

The computer restarts and the PC Recovery tool opens.

3. Click

4. Follow the on-screen instructions to complete the system

recovery.

If you want to perform a

destructive

recovery:

✎

A destructive recovery formats the hard drive and restores the
computer to its factory state. Select this option only as a last
resort.

a. Click

Advanced Options

on the System Recovery screen.

b. Select

Destructive Recovery

and follow the on-screen

instructions.

Summary of Contents for Presario V3000 - Notebook PC























































































































































































































































































Search results

Summary of Contents for Presario V3000 - Notebook PC

Reviews:

Related manuals for Presario V3000 - Notebook PC

Brands by name

Popular brands

Compaq Presario V3000 - Notebook PC, Service Manual

Search results

Summary of Contents for Presario V3000 - Notebook PC

Reviews:

Related manuals for Presario V3000 - Notebook PC

Brands by name

Popular brands