Compaq Presario V3000 - Notebook PC Service Manual Download

Page: 153 / 278

Removal and Replacement Procedures

Maintenance and Service Guide

5–55

2. Release the ZIF connector to which the audio/infrared board

cable is connected and disconnect the cable

from the

system board.

3. Remove the silver Phillips PM2.5×5.0 screw

that secures

the audio/infrared board to the computer.

4. Lift the rear edge of the audio/infrared board

and swing it

forward until the audio connectors disengage from the
base enclosure.

5. Remove the audio/infrared board

Removing the Audio/Infrared Board

Reverse the above procedure to install the audio/infrared board.

Summary of Contents for Presario V3000 - Notebook PC























































































































































































































































































Search results

Summary of Contents for Presario V3000 - Notebook PC

Reviews:

Related manuals for Presario V3000 - Notebook PC

Brands by name

Popular brands

Compaq Presario V3000 - Notebook PC, Service Manual

Search results

Summary of Contents for Presario V3000 - Notebook PC

Reviews:

Related manuals for Presario V3000 - Notebook PC

Brands by name

Popular brands