Compaq Presario V3000 - Notebook PC Service Manual Download Page 116

Page: 116 / 278

5–18

Maintenance and Service Guide

Removal and Replacement Procedures

5. Make note of which wireless antenna cable is attached to

which antenna clip on the Mini Card module before
disconnecting the cables, then disconnect the cables

from

the module.

6. Remove the two Phillips PM2.0×3.0 screws

that secure the

Mini Card module to the computer. (The edge of the module
opposite the socket rises away from the computer).

7. Remove the module

by pulling it away from the socket at

an angle.

✎

Mini Card WLAN modules are designed with a notch

prevent incorrect installation into the Mini Card module socket.

Removing a Mini Card Module

Reverse the above procedure to install a Mini Card module.

Summary of Contents for Presario V3000 - Notebook PC























































































































































































































































































Search results

Summary of Contents for Presario V3000 - Notebook PC

Reviews:

Related manuals for Presario V3000 - Notebook PC

Brands by name

Popular brands

Compaq Presario V3000 - Notebook PC, Service Manual

Search results

Summary of Contents for Presario V3000 - Notebook PC

Reviews:

Related manuals for Presario V3000 - Notebook PC

Brands by name

Popular brands