PowerStorm 300/AGP Hardware Overview
1–2 PowerStorm 300 Graphics Options Windows NT and Hardware Installation
Table 1-2 provides a matrix of support information for the PowerStorm 300/AGP graphics
option.
Table 1-2 Compaq PowerStorm 300/AGP Support Matrix
System
Service Pack
O/S Version
Compaq Professional
Workstation AP500
Service Pack3
or later
Windows NT 4.0
Compaq Professional
Workstation SP700
Service Pack3
or later
Windows NT 4.0
The PowerStorm 300/AGP Graphics Controller option (see Figure 1-1 and Figure 1-2)
contains one standard 15-pin VGA connector on the AGP bulkhead.
The option module contains one 3-pin jumper for enabling or disabling the VGA capability
when more than one VGA graphics module is installed in the same system.
Figure 1-1 PowerStorm 300/AGP Graphics Controller ATX Form
ML014617
1
2
4
3
➊
Standard 15-pin VGA connector
➌
VGA enabled (default)
➋
VGA enable/disable jumper
➍
VGA disabled
