Integrating UNIX into Windows NT
4-25
Compaq Confidential – Need to Know Required
Writer:
Doug Warren
Project:
Compaq TaskSmart N2400 Administration Guide
Comments:
Part Number:
177675-002
File Name:
e-ch4.doc
Last Saved On:
2/9/01 12:45 PM
Changing Primary Mapping
If you attempt to create multiple maps for one Unix user or group to multiple
Windows users or groups, then you will be asked to choose which mapping to
set primary.
Figure 4-17. Primary User Mapping applied
To change the primary user mapping, perform the following steps:
1.
Highlight the map that you want to assign as primary.
2.
Click Set Primary.
3.
Click Yes to have the new mapping selected as primary
4.
Click Apply at the top of the pane to save changes.
NOTE:
These same procedures are used to create or change primary group mappings.
