Compaq ML350 - ProLiant - G2 Maintenance And Service Manual Download Page 74

Page: 74 / 89

Connectors, Switches, and LEDs

Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide

4-15

COMPAQ CONFIDENTIAL

Codename: Steel Dragon Part Number: 278704-002 Last Saved On: 12/18/02 9:49 AM

Table 4-7: Hot-Plug SCSI Hard Drive LED Combinations

continued

Activity Online

Fault

Meaning

Off

OK to replace the drive online if a predictive
failure alert is received (refer to the
“Predictive Failure Alert” section in the

Compaq Servers Troubleshooting Guide

for

details), provided that the array is
configured for fault tolerance and all other
drives in the array are online.

The drive is online and is configured as part
of an array.

Off

OK to replace the drive online if a predictive
failure alert is received (refer to the
“Predictive Failure Alert” section in the

Compaq Servers Troubleshooting Guide

for

details), provided that the array is
configured for fault tolerance and all other
drives in the array are online.

The drive is online and is configured as part
of an array.

On or flashing

Off

OK to replace the drive online if a predictive
failure alert is received (refer to the
“Predictive Failure Alert” section in the

Compaq Servers Troubleshooting Guide

for

details), provided that the array is
configured for fault tolerance and all other
drives in the array are online.

The drive is online and is being accessed.

Summary of Contents for ML350 - ProLiant - G2


























































































Search results

Summary of Contents for ML350 - ProLiant - G2

Reviews:

Related manuals for ML350 - ProLiant - G2

Brands by name

Popular brands

Compaq ML350 - ProLiant - G2, Maintenance And Service Manual

Search results

Summary of Contents for ML350 - ProLiant - G2

Reviews:

Related manuals for ML350 - ProLiant - G2

Brands by name

Popular brands