Compaq ML350 - ProLiant - G2 Maintenance And Service Manual Download Page 49

Page: 49 / 89

Removal and Replacement Procedures

Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide

2-35

COMPAQ CONFIDENTIAL

Codename: Steel Dragon 2.4 Part Number: 278704-002 Last Saved On: 12/18/02 9:43 AM

Processor Power Module

WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal
system components to cool before touching them.

To remove a Processor Power Module (PPM):

1. Complete the preparation procedures. Refer to “Preparation Procedures” earlier in this

chapter.

2. Open the bezel door. Refer to “Bezel Door” earlier in this chapter.

3. Remove the access panel. Refer to “Access Panel” earlier in this chapter.

4. Locate the PPM to be removed.

5. Press the latches outward to release the PPM (1).

6. Lift the PPM away from the socket (2).

Figure 2-33: Removing a Processor Power Module
(PPM)

To replace a PPM, reverse steps 2 through 6.

Summary of Contents for ML350 - ProLiant - G2


























































































Search results

Summary of Contents for ML350 - ProLiant - G2

Reviews:

Related manuals for ML350 - ProLiant - G2

Brands by name

Popular brands

Compaq ML350 - ProLiant - G2, Maintenance And Service Manual

Search results

Summary of Contents for ML350 - ProLiant - G2

Reviews:

Related manuals for ML350 - ProLiant - G2

Brands by name

Popular brands