7
Adjusting Picture Quality
Prior to adjusting the picture, Compaq recommends that you wait 15 to 30 minutes to allow your
monitor to reach maximum brightness.
Using Your On-Screen Display
The On-Screen Display (OSD) adjusts the screen image based on your viewing preferences. To access
the OSD, do the following:
1.
If your monitor is not already on, press the power button to turn it on. (For the location of front
panel control buttons, see “Operating Your Monitor” in the previous section).
2.
Press the left or right
Function Select Control
button to display the On-Screen Display menu.
IMPORTANT:
The OSD for your monitor may have been updated while the version number shown on all
OSD menus in this user guide will stay as Version 1.00.
3.
To select a function, press the left or right
Function Select Control
button until the function is
highlighted.
4.
Use the
Adjustment Control (+/-)
buttons to increase or decrease the level of adjustment.
5.
Press
Save/Exit
to save the select the new adjustment, then exit the OSD menu.
