Step 2: Confirm the Voltage Setting
Ensure that the voltage select switch for the power supply is set to the correct voltage for your region
(115 volts or 230 volts).
CAUTION:
You should not need to change the voltage setting; however, you should verify that
the voltage selection is compatible with your local power specifications. Failure to do so could
result in damage to the computer.
2
Chapter 1 Quick Setup
ENWW
Summary of Contents for dx2200 - Microtower PC
Page 1: ...Quick Setup Getting Started HP Compaq Business PC...
Page 4: ...iv About This Book ENWW...
Page 6: ...vi ENWW...
