Compaq Deskpro 2000, Service & Reference Manual

Page: 68 / 110

Compaq Service Reference Guide D-3
POST Error Messages
Continued
Screen Message Beeps* Probable Cause Recommended Action
207-ECC Corrected Single Bit
Errors in Memory Socket(s)
y,y 2S Single Bit ECC error. 1. Verify proper memory module
type.
2. Try another memory socket.
3. Replace memory module if
problem persists.
212-Failed Processor None Processor has failed to
initialize. 1. Reseat the processor in its
socket.
2. If the processor does not
respond, replace it.
213-Incompatible memory
Module in memory Socket(s)
X,X, X 2S A memory module in memory
socket identified in the error
message is missing critical
SPD information, or is
incompatible with the chipset. 1. Verify proper memory module
type.
2. Try another memory socket.
3. Replace memory with a module
conforming to the SPD
standard.
214-Memory Device Failure.
Error Code: XX Memory
Module Socket(s):XX None A specific error has occurred
in a RDRAM device installed
in the identified socket. 1. Verify proper memory module
type.
2. Try another memory socket.
3. Replace memory module if
problem persists.
301-Keyboard Error None Keyboard failure. 1. Reconnect keyboard with
computer turned off.
2. Check connector for bent or
missing pins.
3. Ensure that none of the keys are
depressed.
4. Replace keyboard.
304-Keyboard or System Unit
Error None Keyboard failure. 1. Reconnect the keyboard with
computer turned off.
2. Ensure that none of the keys are
depressed.
3. Replace keyboard.
4. Replace system board.
401-Parallel Port 1 Address
Assignment Conflict 2S IRQ address conflicts with
another device. Reset the IRQ.
* L = Long, S = Short
Continued