Compaq Service Reference Guide
2-3
4. To apply and save changes, select File
#
Save Changes and Exit.
❏
If you selected an option that automatically restarted the computer, changes were applied
at that time.
❏
If you have made changes that you do not want applied, select Ignore Changes and Exit.
❏
If you have already applied changes you now want to eliminate, select Set Defaults and
Exit. This option will restore the original system defaults.
✎
Be sure to configure new options and drivers in the operating system after they
have been configured by the Setup Utility.
Power-On Self-Test (POST)
POST is a series of diagnostic tests that runs automatically when the system is turned on, POST
checks the following items to ensure that the computer system is functioning properly:
!"
Keyboard
!"
Memory modules
!"
Diskette drives
!"
All IDE and SCSI mass storage devices
!"
Processors
!"
Controllers
✎
If the Power-On Password is set, a key icon appears on the screen while POST is
running. You will need to enter the password before continuing. Refer to Chapter 3
for information on setting, deleting, or bypassing the password.
If POST finds an error in the system, an audible and/or visual message occurs. Refer to
Appendix D for POST error Messages and their solutions.
Summary of Contents for Deskpro 2000
Page 110: ...123385 003 152611 001 ...