J-6
Diagnostic Error Codes
Tape Drive
Error
Code
Description
Recommended Action
1900-xx
ID test failed.
The following steps apply to 1900-xx through 1910-xx:
1901-xx
Servo test failed.
1. Replace the tape cartridge and retest.
1902-xx
Format or format verification
test failed.
2. Reseat and/or replace the signal cable and retest.
1903-xx
Sensor test failed.
3. Check the switch settings on the adapter card (if
applicable).
1904-xx
BOT/EOT test failed.
4. Replace the tape adapter card (if applicable) and retest.
1905-xx
Read test failed.
5. Replace the tape drive and retest.
1906-xx
Write/read/compare failed.
6. Replace the system board and retest.
1910-xx
Tape erase test failed.
Video
Error
Code
Description
Recommended Action
501-xx
Graphics controller test failed.
The following steps apply to 501-xx through 516-xx:
502-xx
Video memory test failed.
1. Replace the monitor and retest.
503-xx
Video attribute test failed.
2. Replace the graphics controller and retest.
504-xx
Video character test failed
3. Replace the system board and retest.
505-xx
Video 80 × 25 mode 9 × 14
character cell test failed.
506-xx
Video 80 × 25 mode 8 × 8
character cell test failed.
507-xx
Video 40 × 25 mode test failed.
508-xx
Video 300 × 200 mode color set 0
test failed.
509-xx
Video 320 × 200 mode color set 1
test failed.
510-xx
Video 640 × 200 mode test failed.
511-xx
Video screen memory page test
failed.
512-xx
Video gray scale test failed.
514-xx
Video white screen test failed.
516-xx
Video noise pattern test failed.
2401-xx
Graphics controller test failed.
1. Reseat the video card (if applicable) and retest.
2. Replace the video card and retest.
3. Replace the system board and retest.
2402-xx
Memory test failed.
The following steps apply to 2402-xx through 2419-xx:
2403-xx
Attribute test failed.
1. Reseat the video card (if applicable) and retest.
Continued
Summary of Contents for Deskpro 2000
Page 110: ...123385 003 152611 001 ...