T
rou
ble
s
hoo
ting
•
•
•
•
•
Troubleshooting
55
Program Scan Tos
The Scan To menu is created by your computer. If the
C3 1000 has not been attached to a PC with the
Settings Utility installed, the Scan To menu will be
blank.
•
Make sure the USB cable is connected and the C3
1000 software has been installed.
•
Run the C3 1000 Settings Utility. If it is already
running, right-click on the icon in the system tray
and select
Shutdown
before running it again.
For help in programming your Scan To menu, See
“Scan To Menu” on page 13.
Waiting for PC
You have initiated a task that requires assistance from
the PC, such as pressing the Scan button. The C3 1000
is waiting for the PC to wake up or become available.
It will wait for approximately two minutes. To stop
waiting before the timeout occurs, press the Cancel
button.
PC Not Available
You have initiated a task that requires assistance from
the PC, but the PC was not available. Make sure:
Your PC is On and is not in suspend mode. If you are
unsure, move the mouse. If you can see your mouse
moving, your PC is available.
The USB cable is connected to both the C3 1000 and
your computer.
Summary of Contents for Compaq C31000
