6.
Pull the display inverter board insulator aside to gain access to the
screws (Figure 5-23).
7.
Using a Torx T-15 screwdriver, remove five screws securing the display
inverter board (Figure 5-23).
To replace the display inverter board, reverse the steps in the above
illustration.
Speaker Assembly
To remove the speaker assembly from the display inverter board, complete the
following steps:
1.
Remove the keyboard (Section 5.5).
2.
Remove the front bezel (Section 5.14).
3.
Carefully disconnect the speaker assembly cable from the display inverter
board (Figure 5-24).
