3.
Check and/or replace
drive cable and
retest.
4.
Replace the I/O board
and retest.
-----------------------------------------------------------------------------
699 - 00
Diskette drive/media ID
1.
Replace the media.
error, rerun COMPAQ
2.
Run COMPAQ EISA
EISA Configuration utility
Configuration utility.
=============================================================================
Table 3-8.
Serial Test Error Codes
=============================================================================
Error
Recommended
Code
Description
Action
-----------------------------------------------------------------------------
1101 - 01
Serial Port Test: UART
Replace the I/O board and
DLAB bit failure
retest for error codes
1101 - xx through
1101 - 02
Serial Port Test; line
1109 - xx.
input or UART fault
1101 - 03
Serial Port Test; address
line fault
1101 - 04
Serial Port Test; data
line fault
1101 - 05
Serial Port Test; UART
control signal failure
1101 - 06
Serial Port Test; UART
THRE bit failure
1101 - 07
Serial Port Test; UART
DATA READY bit failure
1101 - 08
Serial Port Test; UART
TX/RX buffer failure
1101 - 09
Serial Port Test; INTERRUPT
circuit failure
1101 - 10
Serial Port Test; COM1 set
to invalid interrupt
1101 - 11
Serial Port Test; COM2 set
to invalid interrupt
-----------------------------------------------------------------------------
Error
Recommended
Code
Description
Action
-----------------------------------------------------------------------------
1101 - 12
Serial Port Test; DRIVER/
Replace the I/O board and
RECEIVER control signal
retest for error codes
failure
1101 - xx through
1109 - xx.
1101 - 13
Serial Port Test; UART
control signal interrupt
failure
