Compaq Armada m700 - Notebook PC Maintenance And Service Manual Download Page 88

Page: 88 / 141

Removal and Replacement Procedures

5-13

Inserting a Hard Drive into the MultiBay Adapter

Before a hard drive can inserted into the MultiBay, it must first be placed in the hard
drive MultiBay adapter.

1. Push the adapter slide tabs

➊

toward the outside of the adapter (Figure 5-12).

2. Place the hard drive, label up, into the adapter

➋

, and slide the drive connector

toward the adapter connector

➌

until the drive is seated.

3. Release the adapter slide tabs.

Figure 5-12.

Inserting a Hard Drive into the MultiBay Adapter

Summary of Contents for Armada m700 - Notebook PC














































































































































Search results

Summary of Contents for Armada m700 - Notebook PC

Reviews:

Related manuals for Armada m700 - Notebook PC

Brands by name

Popular brands

Compaq Armada m700 - Notebook PC, Maintenance And Service Manual

Search results

Summary of Contents for Armada m700 - Notebook PC

Reviews:

Related manuals for Armada m700 - Notebook PC

Brands by name

Popular brands