Compaq Armada 4200 Reference Manual Download Page 74

Page: 74 / 178

9-2 Enjoying Compaq Audio

Writer: Dianne Fielden Saved by: Debbie Machac Saved date: 10/28/97 11:36 AM

Part Number: 290779-001 File name: CH09

Identifying Built-In Audio Components

The computer features the following audio components:

■

Internal electric condenser microphone with standard
sensitivity of 67 dB.

■

Internal stereo speakers on the computer (and on the Mobile
CD Expansion Unit, MCD.

■

Output jacks for external stereo headphones or speakers that
have a 3.5-mm, 3-conductor plug.

■

External microphone input jack that accepts a 2-conductor,
3.5-mm plug from an electret condenser microphone.

■

External audio input jack that accepts a 3-conductor, 3.5-mm
plug.

Summary of Contents for Armada 4200



















































































































































































Search results

Summary of Contents for Armada 4200

Reviews:

Related manuals for Armada 4200

Brands by name

Popular brands

Compaq Armada 4200, Reference Manual

Search results

Summary of Contents for Armada 4200

Reviews:

Related manuals for Armada 4200

Brands by name

Popular brands