manualshive.com logo in svg

Compaq Armada 4200, Reference Manual, Page: 121 / 178

Share
Download
Compaq Armada 4200 Reference Manual Download Page 121

Troubleshooting    15-9

Writer: Dianne Fielden    Saved by: Dianne Fielden    Saved date: 09/19/97 11:36 AM

Part Number: 290779-001    File name: CH15

Solving Hardware Installation Problems

Some common causes and solutions for hardware installation
problems are listed in the following table.

Hardware Installation Problems and Solutions

Problem

Possible Cause

Solution

New device is not
recognized as part
of the computer
system.

Suspend was not
initiated before
device was con-
nected.

Initiate Suspend, connect
the device, and then exit
Suspend.

The system did not
automatically
configure the new
device.

Check the documentation
that came with the new
device to determine if any
device drivers are
necessary. If so, install the
correct device drivers.

To view the status, change
drivers, or change the
configuration, go to the
Device Manager in the
Systems icon on the
Control Panel. Click the
plus sign next to the type of
hardware, then double-click
the hardware to view the
device configuration.

Cables of new
external device are
loose or power
cables are un-
plugged.

Ensure that all cables are
properly and securely
connected.

Power switch of
new external device
is not turned on.

Place the computer in
Suspend by pressing the
suspend button. Turn on
the new external device.
Press the suspend button
again to exit Suspend. This
enables the system to
recognize the device.

Device is not
seated properly.

Turn off the computer and
reinsert the device.

Summary of Contents for Armada 4200



















































































































































































Reviews:

No comments