Compaq Armada 4200 Reference Manual Download Page 29

Page: 29 / 178

3-8 Using Keyboard Shortcuts

Writer: Dianne Fielden Saved by: Debbie Machac Saved date: 10/29/97 10:24 AM

Part Number: 290779-001 File name: CH03

Special Function Keys

Continued

Key

Function

Ctrl+Alt+Delete

Restarts the system after the computer has been
turned on and is locked up while in MS-DOS mode.

NOTE:

Shut Down on the Windows Start menu is

the recommended way to restart the computer while
in Windows. Also stops the restoration of information
when the computer exits Hibernation.

Fn + suspend

Initiates Hibernation.

Ctrl+Power

Resets the system in case of a system lockup, when
the mouse doesn’t work and

Ctrl+Alt+Del

is not

recognized by the unit.

Using the Numeric Keypad

The embedded numeric keypad is a section of the keyboard that
converts to a numeric keypad when the

NumLk

function is

activated. This is done by pressing

Fn+NumLk.

Use this toggle key

function to enable and disable the embedded numeric keypad.

Embedded Numeric Keypad

Summary of Contents for Armada 4200



















































































































































































Search results

Summary of Contents for Armada 4200

Reviews:

Related manuals for Armada 4200

Brands by name

Popular brands

Compaq Armada 4200, Reference Manual

Search results

Summary of Contents for Armada 4200

Reviews:

Related manuals for Armada 4200

Brands by name

Popular brands