Writer: Beth Snowberger - Saved by: Fleur - Saved date: 08/16/99 11:59 PM
File name: Wombat_RefGuide_final_0810
Inserting the Memory Module
Press the right end of the module
Ì
downward until it is fully inserted,
and tighten the screw.
Replace the memory compartment cover, inserting the right end of the
cover first, and tighten the screw.
Turn on the device, by pressing the power button. The opening screen
reports the new memory size.
Follow the instructions on the screen to reconfigure the device.
Tap Start
à
à
Settings
à
à
Asset Viewer
à
à
Memory to check the memory
size. If it reports the correct memory size, the upgrade has been
successful.
NOTE
: If the memory size reported is incorrect, the memory module may
be damaged or it may not have been installed properly. You can try to
correct this problem by uninstalling the memory module then re-installing
the module as described above.
Ë
Ì
