background image

 

31 

European Union Notice 

Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low 
Voltage Directive (73/23/EEC) issued by the Commission of the European Community. 

 
Compliance with these directives implies conformity to the following European norms (in brackets 
are the equivalent international standards): 

• EN55022 (CISPR 22)-Electromagnetic Interference 

• EN55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic Immunity 

• EN61000-3-2 (IEC61000-3-2) – Power Line Harmonics 

• EN61000-3-3 (IEC61000-3-3) - Power Line Flicker 

• EN60950 (IEC950) – Product Safety 

 

Japanese Notice

 

 
 
 
 
 
 
 

Korean Notice 
 
 
 
 
 
EPA Energy Star Compliance 

Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star 
program.  As an Energy Star Partner, Hewlett-Packard Company has determined that this product 
meets the Energy Star guidelines for energy efficiency.  Specific details on using the Energy Saving 
features can be found in the energy saver or power management section of the computer manual. 

Summary of Contents for 301042-003 - TFT 1501 - 15" LCD Monitor







































Reviews: