4-13
Compaq Integrated Remote Console User Guide
Writer: Caroline Juszczak Project: Compaq Integrated Remote Console User Guide Comments: 281862-00x
File Name: E-CH04.DOC Last Saved On: 12/21/98 10:32 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
This debug information can be easily captured for later analysis by using the
Copy to Clipboard function of the terminal emulator application. In Insight
Manager this can be done by clicking Copy, located at the bottom of the
terminal window.
From visual inspection of the server console, you can see that the operating
system is off line. To restore this server to an online state, it must rebooted.
This can be done by returning to the Main Menu and selecting the Reboot
Server… menu option.
To return to the Main Menu, press the [Atn] Esc sequence, described earlier in
this chapter. If you are using the terminal window from within Insight Manager,
click Switch Consoles.
After switching to the Main Menu, select Reboot Server…. This invokes the
Reboot Server submenu shown in Figure 4-8.
Figure 4-8. Server Reboot menu
From this menu, you can reboot the server in one of two ways:
■
Perform a low-level reset of the server and all connected peripherals.
This is the same type of reset that occurs following an Automatic Server
Recovery event. Although the server itself is reset, you remain
connected and can monitor the reboot process from within Remote
Console mode.
■
Cycle Power to the Server is available on servers that support this
feature. Since both Remote Console and the modem rely on server
power to function, you cannot remain connected to the server through
this type of reset. However, Remote Console can be configured to
automatically reestablish the connection when power returns.
