Compaq 281862-002 User Manual Download

Page: 27 / 140

2-13

Compaq Integrated Remote Console User Guide

Writer: Caroline Juszczak Project: Compaq Integrated Remote Console User Guide Comments: 281862-00x

File Name: C-CH02.DOC Last Saved On: 11/20/98 12:54 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

5. Verify/Change the user’s security settings. Position the highlight to

Security Access and press Enter. Ensure the correct setting of the
following security attributes:

Figure 2-8. Example: Edit User screen

a. Supervisor Rights — A user with supervisor rights can remotely

modify all Integrated Remote Console configuration parameters,
including the addition, deletion, and modification of other users.
The default setting is disabled.

b. Remote Console Rights — Authenticated user has remote access

to the managed server’s console. Users can be assigned login
access, but have no access to the server console. The default setting
is enabled.

c. Reboot Server Rights — Authenticated user can remotely reboot

or power-cycle the managed server. The default setting is enabled.

d. Boot Sequence Replay Rights — Authenticated user can replay

boot sequences stored in the Integrated Remote Console. The
default setting is enabled.

Summary of Contents for 281862-002













































































































































Search results

Summary of Contents for 281862-002

Reviews:

Related manuals for 281862-002

Brands by name

Popular brands

Compaq 281862-002, User Manual

Search results

Summary of Contents for 281862-002

Reviews:

Related manuals for 281862-002

Brands by name

Popular brands