Overview of Server Installation
2-9
Compaq Confidential – Need to Know Required
Writer:
Jennifer Hayward
Project:
Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide
Comments:
Part Number:
234833-001
File Name:
c-ch2 Overview of Server Installation.doc
Last Saved On:
5/22/01 2:48 PM
4.
Power up the server. See step 3 of “Factory-Installed Operating
Systems” for instructions.
5.
To select the type of operating system and set the date and time, run
ROM Based Setup Utility (RBSU) by pressing the
F9
key when
prompted during initial boot.
For more information on RBSU, see Chapter 5, “Server Configuration
and Utilities,” or refer to the
Compaq ROM Based Setup Utility User
Guide
.
6.
Insert the SmartStart CD into the CD-ROM drive. Refer to “Configuring
the Server” in the following section for instructions. For SmartStart CD
initialization procedures, refer to Chapter 5, “Server Configuration and
Utilities,” or the Server Setup and Management pack shipped with your
server.
7.
Install the operating system software.
8.
To manage the server, install Compaq Insight Manager, found on the
Compaq Management CD. For Compaq Management CD initialization
procedures, refer to the Server Setup and Management pack shipped
with your server.
IMPORTANT:
You must install and use Compaq Insight Manager to benefit from the
Compaq Pre-Failure Warranty on processors, hard drives, and memory modules.
9.
Install any application software needed.
10.
Register your server. See the section “Server Registration,” later in this
chapter, for details.
