Index
Compaq Smart Array 5300 Controller User Guide
Index-7
COMPAQ CONFIDENTIAL
Writer: John Turner File Name: x-index.doc
Codename: SilverHammer Part Number: 135606-004 Last Saved On: 5/23/02 9:57 AM
memory
allocation of, to cache, in ACU 7-10
allocation of, to cache, in
array accelerator 1-6
ECC SDRAM 1-6
linear 5-6
required amount of, for stripe size
change 7-25
migration
caution for 7-12
in ACU 7-25
in CPQONLIN 7-34
time required for 7-25, 7-34
minimum
cache memory required for stripe size
change 7-25
capacity of spare drive 7-18
number of hard drives for RAID D-10
mirroring of drives D-6
mouse compliance statement A-4
moving
multi-device cable 3-5
multiple controllers, using H-1
multiple hard drive failure D-10
multiple logical drives, creating 7-14
multiple spare drives 7-18
N
NetWare
ACU and 7-5
array configuration utility for 7-26
Block Sub-Allocation in 5-6
capacity extension in, using ACU 7-24
CPQONLIN and 7-26
creating volume in 5-6
linear memory in 5-6
optimizing controller performance
in 5-6
partition in, creating 5-6
NetWare Online Array Configuration
Utility
See
CPQONLIN
no fault tolerance (RAID 0) D-5
non-Compaq hard drives H-3
O
offset VHDCI, illustration of 3-5
online capacity extension, operating systems
supporting 7-24
online configuration using ACU 7-5
online drive capacity upgrade E-10
online spare
activation of 1-9
adding, in ACU 7-18
adding, in CPQONLIN 7-31
defined D-5
limitations of D-5
support for 1-4
use of, with alternative fault-tolerance
methods D-11
operating systems supported by
controller 1-4
optimum stripe size 7-14
option kit part numbers for cables 3-5, 3-6
options
adapter board, illustrated 1-3
array accelerator, illustrated 1-3
cache, illustrated 1-3
installation of 9-1
updating firmware for 5-1
Options ROMPaq
creating diskettes 5-3
overview of 5-1
running from CD 5-2
ORCA (Option ROM Configuration for
Arrays)
comparison of, with other configuration
utilities 7-2
configuring array with 7-1
limitations of 7-2
setting boot controller with 6-3
