Upgrading and Replacing Options
Compaq Smart Array 5300 Controller User Guide
9-15
COMPAQ CONFIDENTIAL
Writer: John Turner File Name: j-ch9 upgrading and replacing options.doc
Codename: SilverHammer Part Number: 135606-004 Last Saved On: 7/22/02 11:04 AM
To remove the RAID ADG Enabler Module:
Press the innermost plastic clip under the controller board towards the other clip (1),
and push the module out of the board (2).
1
2
Figure 9-16: Removing the RAID ADG Enabler Module
To install the module on the new controller board:
1.
Check that the array accelerator on the new controller board has at least 64 MB
of read/write cache.
2.
Hold the module at an angle and insert the rear end of the module into the
appropriate slot (1).
