background image

CO

M

51

12

Distributed by  

Companion Brands

 

Bundoora Victoria 3083 

www.companionbrands.com.au

SPECIFICATIONS

Part number

COMP534

Model number

SG-203-04

Gas jet size

Large: 0.37mm - Medium: 0.32mm

Gas consumption

Large: 228g/hr - 10.6mj/h, Medium: 160g/hr - 7.4mj/h

BTU output

Large: 10,000BTU - Medium: 7,000BTU

Dimensions

545 x 290 x 90mm

Weight

4.3kg

Certificate number

8484G

TECHNICAL DETAILS

CARE INSTRUCTIONS

Using warm soapy water with a mild detergent wipe down all surfaces and areas of the appliance, taking care not to allow 
water to enter the burner outlets or aeration holes located in the burner tube. 

DO NOT

 submerge the appliance in a sink or bowl. 

DO NOT

 use abrasive cleaners or bleach. 

MAINTENANCE AND SERVICE

During operation if it is noted that the burner flame is unstable, is changing colour from blue to yellow or has a distinct 
smell it is important that you take the appliance to your local authorised gas appliance repairer for inspection. 
Periodically check the gas control is tight and has no leaks, follow the testing for leaks procedure. Check the gas 
connection and regulator for any signs of wear or damage, if identified contact customer service for a replacement 
assembly immediately. 
For further information or assistance please contact customer service on 1300 555 197 or email  
[email protected] 

COM5112_COMP534 Weekender 2 burner stove_Manual_F.indd   8

15/06/2017   2:07 PM

Summary of Contents for Weekender SG-203-04









Reviews: