background image

6

WHEN THE POWER PACK IS IN USE

 and the voltage 

decreases to 10.5V, the unit will automatically switch 
OFF and the Low Voltage Warning indicator (red) will 
commence flashing with an audible single beep every 5 
seconds for 10 minutes and then remain illuminated. 

WHEN THE POWER PACK IS STORED AND  
NOT IN USE

 and the voltage decreases to 11.5V  

a single beep will continue every 10 minutes as  
a first alert warning to charge the Power Pack.
If the Power Pack is not recharged and the voltage 
continues to decrease to 10.5V, the unit will 
automatically switch OFF and the Low Voltage Warning 
indicator (red) will commence flashing with a single 
beep every 5 seconds for 10 minutes.
The Low Voltage Warning indicator (RED) will then 
remain illuminated and the audible beep will stop.

IMPORTANT: THE POWER PACK MUST  

NOW BE RECHARGED - FULLY RECHARGE EVERY 3 
MONTHS.

To restore power to the digital display screen or  
the on/off switches, press the RESET switch  

before

 recharging.

Note: All appliances and any charging adaptor  
(or solar panel) must be disconnected from the Power 
Pack for the RESET switch to operate.

IMPORTANT: STORE FULLY CHARGED

 to maximise 

performance and battery life of the Power Pack.

Low Voltage Warning

The Power Pack is equipped with a low voltage (low 
battery capacity) warning system that activates 
automatically when the Power Pack voltage decreases 
to a low voltage level. 

Summary of Contents for COMPBI012













Reviews: