![background image](http://html1.mh-extra.com/html/companion/compbi012/compbi012_owners-manual_2644805005.webp)
OWNERS MANUAL
5
Digital display
When the Power Pack is in use with an appliance
connected, press the DISPLAY SWITCH and the digital
display will show the VOLTAGE (V) of the Power Pack
and the CURRENT (A) amperage used by the appliance.
When you press the DISPLAY SWITCH with no appliances
connected, the digital display will show the VOLTAGE
(V) of the Power Pack and zero (00.0) CURRENT (A)
amperage.
When charging with the AC adaptor, the digital display
will show the VOLTAGE (V) and the CURRENT (A) that
the Power Pack is receiving.
When being charged by Solar or the DC lead via the
Anderson style plug socket, the digital display will
indicate the VOLTAGE (V) of what the Power Pack is
receiving from the charging source.
The CURRENT (A) will indicate zero (00.0) if there are
no 12V DC accessories connected.
If the Power Pack is connected with an appliance and
charged at the same time, the digital display will show
the VOLTAGE (V) and CURRENT (A) that the Power Pack
is receiving.
RESET switch
To restore power to the digital display screen or the
on/off switches, press the RESET switch
before
recharging.
Note:
All appliances and any charging adaptor
(or solar panel) must be disconnected from the Power
Pack for the RESET switch to operate.
The Power Pack will beep twice to confirm power has
been restored. The Power Pack can now be recharged.