Compal NBLB2, Service Manual

Page: 43 / 152

NBLB2 Service Manual
37
12.6.6 General Button 2 (Not supported)

System off mode: Press this button, EC will turn on system to launch
Application. (This function needs
“ToshibaControl” utility support).

System on mode: ToshibaControl driver is loaded, presses this
application will issue scan codes [0xE0, 0x14, 0xE0, 0x94] to driver.
12.6.7 USB Charge Button

USB Charge button supported in AC/AC+DC and DC mode with S3/S4
and S5 modes.

Charge function will be disabled 4 hours after the function is turned on
when battery only
.

Charge function will be disabled after system is resumed from S3/S4
and S5.
12.6.8 Play/Pause ( )(Not supported)

When system is turned on, press this button will issue scancode
[0xE0,0x22,0xE0,0xA2] to driver.
12.6.9 Stop/Eject ( )(Not supported)

When system is turned on, press this button will issue scancode
[0xE0,0x24,0xE0,0xA4] to driver.
12.6.10 Next/FF ( )(Not supported)

When system is turned on, press this button will issue scancode
[0xE0,0x19,0xE0,0x99] to driver.
12.6.11 Prev/RR ( )(Not supported)

When system is turned on, press this button will issue scancode
[0xE0,0x10,0xE0,0x90] to driver.
12.6.12 Mute Button (Not supported)

It will mute/un-mute audio.

Volume Mute scan codes

[E0, 20, E0, A0]
12.6.13 Volume Up Button (Not supported)

It will increase volume value.

Volume Up scan codes

[E0, 30, E0, B0]
12.6.14 Volume Down Button (Not supported)

It will decrease volume value.

Volume Down scan codes

[E0, 2E, E0, AE]
12.6.15 WOW Video Button

It will call WOW Video AP

WOW Video button scan code

[E0,75,E0,F5]
12.6.16 WOW Audio Button

It will call WOW Audio AP

WOW Audio button scan codes

[E0,76,E0,F6]
12.6.17 Program DJ

It will call Program DJ AP

Program DJ button scan codes

[E0,78,E0,F8]