Compal Broadband Networks CG6640E, User Manual

Page: 45 / 70

42
Field Description
features.
Enable
Enable or disable this wireless interface.
Transmission Mode Select which 802.11 mode is used by CH6640E/CG6640E,
including 802.11b/g/n mixed mode, 802.11n only, 802.11b/g
mixed mode.
Channel Width
Select the channel width (20 MHz or 20/40 MHz) to be used by
CH6640E/CG6640E. When 20/40MHz is selected 802.11n
clients experience improved throughput using 40 MHz, while
legacy clients(either 802.11a or 802.11b/g) can still be serviced
without interruption using 20MHz.
Primary Channel Select primary (control) channel is in the lower or upper 20 MHz
band of the bonded 40 MHz channel.
Channel
Select the current channel number or control channel, you can
select “Select Best Quality Channel Automatically” check box to
auto select one, this value depend on Transmission Mode.
Transmission Rate Select 802.11 physical transmission rate, this value depends on
Transmission Mode.
Multicast Rate
Select the physical layer transmission rate used for Multicast
traffic on the wireless interface, this value depend on
Transmission Mode.
Wireless Security Page
This page allows you to protect your Wi-Fi wireless network by specifying WEP, 802.1x,
WPA, or WPA2 wireless security. Before setting up security, ensure that your wireless
adaptors support the same type of security.
The default type of security is Mixed WPA-PSK/WPA2-PSK. Field of Mixed WPA-
PSK/WPA2-PSK, WPA2-PSK and WPA-PSK are the same.