background image

Notes

NOTE: The  manufacturer  cannot  accept  responsibility  for  any 

damage  caused  by  improper  use  of  the  machine  or  failure  to 

respect the safety measures indicated below.

Users  are  asked  to  pay  careful  attention  to  the  following 

indications:

Additional safety elements incorpated into our grinder models:

• Hand protector located in the doser in order to avoid fingers 

accidentally getting caught in the grinding burrs

• The  coffee  grinder  should  only  be  used  for  grinding  coffee 

beans.

• Do not use the machine to grind other types of foods such as 

nuts, dried fruits or to fine-grind granulated foods such as sugar, 

etc.

• Do not allow minors or disabled people to use the machine.

• Any other use of the machine will be considered improper and 

dangerous.

• Do not allow liquids to come into contact with the internal or 

external  surfaces  of  the  machine  at  any  time,  except  for  those 

parts  that  have  been  expressly  referred  to  in  the “CLEANING” 

section. If, for any reason, this should occur, immediately disconnect 

the machine from the power supply and dry all surfaces carefully. 

Should it be necessary to access the internal parts of the machine, 

where the electrical components are located, take the machine to 

your local technical service.

•  In  the  event  of  any  broken  components  or  intervention,  we 

recommend that you contact your local technical service, who will 

repair or replace the part, guaranteeing the maintenance of the 

safety standards.

•  Replacement  of  the  main  power  cable  of  any  grinder  model 

should only be done by an authorized supplier.

11

Safety measures

i

!

Summary of Contents for K-3 Elite













Reviews: