1.
SAFET
Y
Safety
You must adhere to the following safety precautions at all times when working on the Compac
COM5 PT1. Failure to observe these safety precautions could result in damage to the COM5
PT1, injury, or death. Make sure that you read and understand all safety precautions before
installing, servicing, or operating the Compac COM5 PT1.
PRECAUTIONS
Always follow safe operating procedures, any national or local regulations and site-
specific instructions.
Make sure that the service area is thoroughly clean when servicing. Dust and dirt
entering the components reduce the life span of the components and can affect
operation.
Some components have sharp edges and corners. Wear gloves whenever practicable while
working inside the cabinet.
Site Safety
Comply with all safe site regulations for the site you are working on and any additional
instructions from the site manager.
Wear and use appropriate safety equipment such as safety boots, high visibility clothing, hard
hat, gloves, and barrier cream.
Cordon off the area you are working in using cones, barriers, caution tape etc.
CAUTION
When working near any flammable goods area, take all precautions to avoid all potential
sources of ignition. This includes but is not limited to: Open flames, hot exhausts, welding
flames or sparks, static electricity, non-intrinsically safe electrical equipment, use of mobile
phones.
These instructions are to be used as a guide only and may not cover all situations. It is the
responsibility of yourself and the site manager to take appropriate health and safety
precautions.