7
MACHINE PREPARATION
1.
HANDLING THE PACKAGED MACHINE
The machine is contained in specific packaging with a pallet for the handling with fork trucks. The
packages CANNOT be placed on top of each other.
The total weight of the machine without the package is 42kg for versions CM1817 – CM4017 and 47kg for
version CM17 DS. The weights refer to standard models, that is without solution tank.
The package dimensions are as follows:
CM1817 – CM4017 – CM17 DS
A : 570 mm
B: 490 mm
C: 1190 mm
A
C
B
2.
HOW TO UNPACK THE MACHINE
1.
The machine is fixed inside the box by means of reinforcements; remove them and set them aside for
future transport.
2.
Remove the outer packaging.
3.
Use a chute to get the machine down from the pallet, pulling it backwards.
4.
Keep the pallet for any future transport needs.
WARNING: if the product is delivered in cardboard containers, handle the
packed product with suitable lifting means that comply with the legal
requirements.
3.
HOW TO MOVE THE MACHINE
1.
Check that the solution tank is empty (optional)
2.
Remove the brush from the base (see corresponding chapter "DISASSEMBLING THE BRUSH")
3.
Position the single brush on the pallet by means of a chute
4.
Insert the cardboard box and the previously kept supports
4. HANDLING AND TRANSPORTATION OF THE MACHINE
To handle the machine safely, proceed as follows:
1.
Check that the solution tank (optional) is empty
2.
Rotate the handlebars to the rest position (see chapter HANDLEBAR ADJUSTMENT) and fix them
in this position
3.
Tilt the machine, by putting a foot into the rear of the base body, so only the rear wheels touch the
ground and the machine can move freely.
5.
HANDLEBAR COMPONENTS
The handlebar components are identified as follows:
1.
Main switch control lever
2.
Handlebar tilt adjustment lever
3.
Solution tank tap control lever (optional)
1
2
1
3
