10
MACHINE PREPARATION
11. ASSEMBLING THE BRUSH – PAD HOLDER
To insert the brush:
1.
Plug the power supply cable into the mains socket
2.
Press the brush rotation speed selector push-button in slow position
3.
Place the brush in front of the base body
4.
Raise the base by using the handlebars as a lever
5.
Place the base above the brush
6.
Activate the handlebar tilt lever
7.
Press the man present push-button and pulse-press the main switch control lever to engage the brush
to the base
WARNING: you are advised to always wear protective gloves, to avoid the risk
of serious injury to your hands
WARNING: during this operation, check there are no people or objects near
the brush.
WARNING: Make sure the brushes are correctly connected. If this is not the
case, the machine could move in an irregular, sudden manner.
