manualshive.com logo in svg

Comnet CWGE24MS, Installation And Operation Manual

Share
Download
Comnet CWGE24MS Installation And Operation Manual Download Page 64

INS_CWGE24MS_REV–

02/18/13     PAGE 64

INSTALLATION AND OPERATION MANUAL 

CWGE24MS

TECH SUPPORT: 1.888.678.9427

Trap Inform 
Timeout(seconds)

Indicates the SNMP trap-inform timeout. The allowed range is 0 to 
2147.

Trap Inform Retry 
Times

Indicates the SNMP trap inform retry times. The allowed range is 0 to 
255.

SNMP-Communities

Configure SNMPv3 community’s table on this page. The entry index key is Community.

Label

Description

Delete

Check to delete the entry. It will be deleted during the next save.

Community

Indicates the community access string to permit access to SNMPv3 
agent. The allowed string length is 1 to 32, and the allowed content is 
the ASCII characters from 33 to 126.

Source IP

Indicates the SNMP access source address.

Source Mask

Indicates the SNMP access source address mask.

Summary of Contents for CWGE24MS














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands