INS_CWGE24MS_REV–
02/18/13 PAGE 40
INSTALLATION AND OPERATION MANUAL
CWGE24MS
TECH SUPPORT: 1.888.678.9427
MSTP
Bridge Settings
This page allows you to configure RSTP system settings. The settings are used by all RSTP Bridge
instances in the Switch Stack.
Label
Description
Protocol Version
The STP protocol version setting. Valid values are STP, RSTP and
MSTP.
Forward Delay
The delay used by STP Bridges to transition Root and Designated
Ports to Forwarding (used in STP compatible mode). Valid values
are in the range 4 to 30 seconds.
Max Age
The maximum age of the information transmitted by the Bridge
when it is the Root Bridge. Valid values are in the range 6 to 40
seconds, and MaxAge must be <= (FwdDelay-1)*2.
Maximum Hop Count This defines the initial value of remaining Hops for MSTI
information generated at the boundary of an MSTI region. It
defines how many bridges a root bridge can distribute its BPDU
information. Valid values are in the range 4 to 30 seconds, and
MaxAge must be <= (FwdDelay-1)*2.
Transmit Hold Count
The number of BPDU’s a bridge port can send per second. When
exceeded, transmission of the next BPDU will be delayed. Valid
values are in the range 1 to 10 BPDU’s per second.
Save
Select to save changes.
Reset
Select to undo any changes made locally and revert to previously
saved values.
