manualshive.com logo in svg

Comnet CWGE24MS, Installation And Operation Manual

Share
Download
Comnet CWGE24MS Installation And Operation Manual Download Page 28

INS_CWGE24MS_REV–

02/18/13     PAGE 28

INSTALLATION AND OPERATION MANUAL 

CWGE24MS

TECH SUPPORT: 1.888.678.9427

Label

Description

Port

This is the logical port number for this row.

Link

The current link state is displayed graphically. Green indicates the link 
is up and red that it is down.

Current Link 
Speed

Provides the current link speed of the port.

Configured Link 
Speed

Select any available link speed for the given switch port. 
Auto Speed:  Selects the highest speed that is compatible with a link 

partner.

Disabled:     Disables the switch port operation.

Flow Control

When Auto Speed is selected for a port, this section indicates the flow 
control capability that is advertised to the link partner.  
When a fixed-speed setting is selected, that is what is used. The 
Current Rx column indicates whether pause frames on the port are 
obeyed, and the Current TX column indicates whether pause frames 
on the port are transmitted. The Rx and TX settings are determined 
by the result of the last Auto-Negotiation. 
Check the configured column to use flow control. This setting is 
related to the setting for Configured Link Speed.

Maximum Frame Enter the maximum frame size allowed for the switch port, including 

FCS. The allowed range is 1518 bytes to 9600 bytes.

Power Control

The column allows for changing the power savings mode parameters 
per port.   
Disabled: All power savings mechanisms disabled.  
ActiPHY: Link down power savings enabled.  
Perfect-Reach: Link up power savings enabled.  
Enabled: Both link up and link down power savings enabled.

Save

Select to save changes.

Reset

Select to undo any changes made locally and revert to previously 
saved values.

Refresh

Select to refresh the page. Any changes made locally will be undone.

Summary of Contents for CWGE24MS














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands