QSG_CWFE2SC(M,S)2 Rev. 11.17.17 PAGE 9
INSTRUCTION MANUAL
CWFE2SC(M,S)2
TECH SUPPORT: 1.888.678.9427
Technical Specifications
ComNet CWFE2SC(M,S)2 technical specifications are as follows:
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3x Flow Control and Back pressure
Connector
Fiber: Duplex SC
RJ45 Socket: CAT-3/5 (10/100Mbps) Twisted Pair cable
Auto MDI/MDI-X and Auto-Negotiation Function Support
Switch architecture
Store and Forward
Fiber parameters
Fiber Core: Multi-Mode (62.5/125 μm, 50/125 μm)
Single-Mode (9/125 μm)
Wavelength: 1310 nm Multimode & Single-mode
Fiber Distance: Multi-Mode Fiber 3 km
Single-Mode Fiber 30 km
Transparent packet
64 to 1518 Bytes for Non-VLAN Ethernet packet
Link Lost Forward
UTP to Fiber: If UTP port link is down, the converter will force the fiber to link
down.
Fiber to UTP: If Fiber port link is down, the media converter will force UTP port to
link down.
DIP Switch
DIP Switch 1: UTP Auto-Negotiate / 100Mbps Full Duplex mode
DIP Switch 2: Fiber Full/Half Duplex
DIP Switch 3: LLF (Link Lose Forwarding) Disable/Enable
DIP Switch 4: Switch Converter / Pure converter mode
LED
Module: Power, TX (100Mbps, LK/Act, FDX/COL) Fiber (LK/Act, FDX/COL)
Power
Stand-alone (external adapter): 5-12 VDC @ 2.7 W
Dimension
Module: 119 × 85 × 26 mm
EMI & safety
FCC Class A, CE
