QSG_CWFE2SC(M,S)2 Rev. 11.17.17 PAGE 7
INSTRUCTION MANUAL
CWFE2SC(M,S)2
TECH SUPPORT: 1.888.678.9427
Rear Panel
The rear panel contains a power socket, which accepts 5-12 VDC @ 2.7 W.
Connect the included Power Supply to the rear panel DC IN jack.
Plug the AC input of the Power Supply to a commercial power source.
DC IN
Fast Fiber Converter Module - Rear Panel
Cabling
»
For the Twisted-pair segment unshielded twisted pair (UTP) or shielded twisted pair (STP)
cabling can be used. The cable must comply with the IEEE 802.3u 100Base TX standard for
Category 5. The cable between the converter and the link partner (switch, hub, workstation,
etc.) must be less than 100 meters (328 feet) long.
»
For the single mode fiber optic segment, use 9/125 μm single mode fiber cable. You can
connect two devices over a distance of 30 kilometers.
»
For the multimode fiber optic segment use 50 or 62.5/125 µm multimode fiber cable. You can
connect two devices up to a 3 kilometer (2 mile) distance.
Connections
CAT5e
CAT5e
2 Multimode
or Single Mode
Optical Fibers
Ethernet
Device
CWFE2SC
CWFE2SC
Ethernet
Device
POWER
SUPPLY
POWER
SUPPLY
