INS_CNFE3TX2CXMS(U,E)_REV– Rev. 7.11.18 PAGE 29
QUICK START GUIDE
CNFE3TX2CXMS(U,E)
TECH SUPPORT: 1.888.678.9427
Firewall Setting
IP Filter
IP filters enable you to control the forwarding of incoming and outgoing data between your LAN
and the Internet and within your LAN. This control is implemented via IP filter rules which are
defined to block attempts by certain computers on your LAN to access certain types of data or
Internet locations. You can also block incoming access to computers on your LAN.
Label
Description
IP Filter
Enables or disables the IP Filter
Description
Enter description for the entry.
Rule
Configures the rules to be applied to the IP filter. Available options include DROP, ACCEPT,
and REJECT.
Direction
Specifies the direction of data flow to be filtered
IP Address
Enter the IP address of the source and destination computer
Protocol
Configures the protocol to be filtered
Enable Now Click Yes to enable the entry after adding it
IP filter list
Shows the information of all IP filters. Click Edit to edit the entry or Del to delete the entry.
