IN1SMS[POE](C,U)_REV– 10/27/11 PAGE 1
TECH SUPPORT: 1.888.678.9427
INSTALLATION AND OPERATION MANUAL
CLFE4+1SMS[POE](C,U) Series
10/100 4TX+1EX ETHERNET SELF-MANAGED SWITCH
WITH POWER OVER ETHERNET (POE+)
The ComNet
™
CopperLine® CLFE4+1SMS[POE](C,U) is a five-port Ethernet switch
with uplink management functionality and provides 4 copper ports operating at
10/100Mbps and is designed to combine four electrical ports into a single electrical
Cat5, UTP or Coax CopperLine port that forwards this data to the next network device.
There is no programming required to use this product. The ComNet CLFE4+1SMS
comes pre-programmed, preventing network video flooding with DIP switch selection
of the fifth electrical port as uplink or as an unmanaged switch. Ports 1–4 of the
CLFE4+1SMSPOE can supply up to thirty (30) watts of Power over Ethernet (PoE) and
incorporate PoE+ features based on the IEEE 802.3at standard. It is “Plug-and-Play”.
Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment
operating status.
Table 2
on
Page 7
describes the LED indicators for each light on
the unit.
These units are interchangeable between stand-alone or card mount configurations,
or may be DIN-rail mounted by the addition of ComNet model DINBKT1 or DINBKT4
adaptor plate. See
Figure A
on
Page 10
for mounting instructions.
This manual serves the following
ComNet Model Numbers:
CLFE4+1SMSC
CLFE4+1SMSU
CLFE4+1SMSPOEC
CLFE4+1SMSPOEU
