3
Chapter 3 Configuration OEM Card by CRU software
Compass Receiver Utility is a windows-based GUI that allows you to access most features of the
receiver without the need to use a terminal emulator or to write special command. CRU lets
you easily communicate with and configure the receiver via serial ports or Ethernet connection,
using a PC with Windows XP or Windows 7 operating system on it.
Compass Receiver Utility is available on the webpage
http://www.comnavtech.com/download.asp?bigclassid=28
3.1 Connected with GNSS receiver
You can use serial port of PC to connect with the receiver, the default baud rate is 115200
(OEM Card baud rate).
Go to
Set port
, set up the connections, and click
OK
If the connection is successful, you will see that the SN number of receiver will show on the left
top of software operation window; if not, please check the power and connection of all parts.
