Assembly
Welcome cubbies have a tool-free connecting system. Lift
one unit and slide it down into the connector on the other
unit. See Figure A.
Figure A
Welcome cubbies connect to Welcome benches and Corner
benches in the same way.
Welcome cubbies also connect to Roomscapes panels and
shelving units using Roomscapes posts.
CAUTION
This will require 2 people. Do not rearrange units with
children nearby.
Operation
Figure B
Removal of name covers
To remove the name cover push it up into top slot and pull
bottom edge forward.
To install a name cover push it up into top slot and push
bottom edge in, and then slide the name cover down into
bottom slot. See figure B.
Removal of dividers
Every other divider between the top pockets can be
removed to give more space per child if needed.
CAUTION
There should be at least 2 dividers left in the unit for
strength.
Stabilizers
The yellow stabilizers at the back of the units fold out of the
way automatically when the units are pushed against a wall
or are used back to back.
WARNING
Do not remove or disable the stabilizers in any way.
They give added stability to the Welcome cubbies when
they are used as room dividers.
Connection to Roomscapes posts
Welcome cubbies can be connected to Roomscapes posts
and panels. The posts attach to the plastic couplings that are
on the ends of the Welcome cubbies. See figure D.
Post
Coupling
The
childproof lock ring
on the bottom of the post pre-
vents children from taking setups apart. It locks automati-
cally when the bottom of the post is on the floor. Release it
by turning it as far as it goes while lifting the post.
WARNING
When using a Roomscapes post to connect two items
always make sure that the childproof ring is locked.
For more information on the Roomscapes connecting system
see the Roomscapes product guide F601 supplied by Com-
munity Playthings with every Roomscapes order.
Maintenance
Periodically inspect for cracks, breaks, loose parts, missing
parts, and/or malfunctions. Remove the product from ser-
vice when any condition develops that might make opera-
tion unsafe.
Cleaning
Wipe with a damp cloth and mild detergent. Dry immedi-
ately. Leaving water or cleaning agent on the surface may
damage the finish. Vacuum out the top pockets.
Construction
The wooden components are manufactured from solid birch
or birch plywood protected with a child-safe finish. The
hooks, dividers and stabilizer parts are plastic. The name
covers are clear plastic.
User Modifications
We cannot be responsible for modifications made by cus-
tomers to our products in the field without our supervision,
testing, or evaluation.
Ordering Parts
To order replacement parts, contact Customer Service with a
description of the part(s) needed and the ID Code from the
product.
Use only replacement parts supplied by
Community Playthings.
Remove this screw and pull the
divider up.
Figure C
Figure D
