- 20 -
Set-up of the cable-reel with reversal cables:
Attach one end of cable ―A‖ to the male connector located near the center hub on the reel. Attach the
other end of cable ―A‖ to an ICRI radio port.
A
Attach one end of adapter ―B‖ to the female connector at the ―free‖ end of the cable. Attach the
other end of adapter ―B‖ to a radio interface cable.
B
With this configuration, the cable reel will remain with the ICRI unit and the radio would travel to
the incident site or remote location for better operating range of the radio.
FIGURE 16: REVERSAL CABLES
Summary of Contents for ICRI-E
Page 29: ...29...
