E501 L1~L2 Service Document
Version 2.0
52
17.
磁力感應測試
磁力感應測試
磁力感應測試
磁力感應測試
(Magnetic Sensor Calibration
test)
當進入此測試時，必須將裝置依照
X, Y ,Z
軸方向轉動，在一分鐘內，判斷是否
Pass
，測試結果顯示於螢
幕
,
測試程式會自行判斷測試結果
Select “Magnetic Sensor Calibration test” in FQC mode.The device should be rotation according to
X/Y/Z Axis. The device will judgment passing or not within one minutes automatically. The result will be
shown on the screen. Press “back key” and back to the manual.
18.
加速度感測器測試
加速度感測器測試
加速度感測器測試
加速度感測器測試
(G Sensor Calibration)
進入此測試後，首先把手機放置於穩定的地方不動，按下
Calibration
按鈕，測試程式會自行判斷測試結果。
Select “G Sensor Calibration t” in FQC mode.Put the device down on the stable desktop without be
moved or shacking, press the “calibrate” bottom and it will judge the result by itself.
Press “back key” and back to the manual.
