4. Commissioning
Page 44
User’s Manual for ION
®
-U
Note:
The LC latch must be pressed down in order to slide it into the cavity of the LC
support.
Insert the LC connector by its side
into Cavity A of LC support
until it
clicks into place.
Insert the LC connectors by their sides
into the LC support
until they click
into place. Ensure that the channel
positioning is correct as shown.
figure 4-26 Simplex cavity A
figure 4-27 Duplex cavity A & B
Align and assemble LC support
with split gasket
or
and clamp
.
Insert this assembly into the plug body
as shown. The inside pin of the
clamp must be aligned with the groove in the split gasket.
figure 4-28 Assemble Opus short plug
figure 4-29 Insert LC connector plug into plug body
5
5
5
3
4
2
6
3
3b
click
click
Channel B
Channel A
click
Channel A
Free slot
4
Inside Pin
Flat surface
Slot alignment mark
