Ruckus ICX 7450 Switch Hardware Installation Guide
31
Part Number: 53-1003899-09
Attaching the front brackets
Complete the following steps to attach the front brackets to the device.
1.
Position the right front bracket with the flat side against the right side of the device at the front of the device, as shown in
2.
Insert four 8-32 x 5/16-in. flathead screws through the vertically aligned holes in the bracket and then into the holes on the side
of the device. Use the upper and lower screw holes, leaving the center holes empty.
3.
Repeat Step 1 and Step 2 to attach the left front bracket to the left side of the device.
4.
Tighten all the 8-32 x 5/16-in. screws to a torque of 15 in-lb (17 cm-kg).
FIGURE 19
Attaching the front brackets
Attaching the extension brackets to the device
Complete the following steps to attach the extension brackets to the device. There are medium and long extension brackets that you can
use for this step. Choose the correct extension bracket for the depth of your rack.
1.
Select the proper length extension bracket for your rack depth.
2.
Position the right extension bracket along the side of the device as shown in
.
3.
Insert four 8-32 x 5/16-in. flathead screws through the vertically aligned holes in the extension bracket and then into the holes
on the side of the device. Use the upper and lower screw holes, leaving the center holes empty.
4.
Repeat Step 1 and Step 2 to attach the left extension bracket to the left side of the device.
5.
Tighten all the 8-32 x 5/16-in. screws to a torque of 15 in-lb (17 cm-kg).
1
Device
3
Screws, 8-32 x 5/16-in., flathead Phillips
2
Front brackets
